Clash Check

Any questions regarding the practice version are asked and answered here.
Post Reply
marc jarnet
Posts: 2
Joined: Tue Aug 25, 2015 2:10 pm

Clash Check

Post by marc jarnet »

We have just modelled an extensive pipe network,
However, with regards to the clash test. we noticed that some lines were missed when qualified with the * identifier subsequently located when models directly quoted.

and that clashes through pits were not identified.
has anyone else had any of these issues, or is this operator error, however several people had similar results, it did appear to be a glitch.
Robert Graham
Posts: 519
Joined: Mon Oct 24, 2005 9:38 am

Post by Robert Graham »

There was been some updates to the 3d clash checking on pits. Which version of 12d are you using?
Post Reply