Determine cut fill line from natural surface tin and design tin

Any questions regarding the practice version are asked and answered here.
Post Reply
Struan Webb
Posts: 8
Joined: Mon Nov 13, 2006 3:49 pm

Determine cut fill line from natural surface tin and design

Post by Struan Webb »

Please advise on the above mentioned subject.

Regards

Struan
Bernard Daly
Posts: 1601
Joined: Wed Nov 02, 2005 8:38 am

Post by Bernard Daly »

Struan,
Look under Tins=>Tin analysis=>Intersection. The original tin will be your NS and new tin will be the Des. The resulting intersection will be the cut/fill line.
Regards,
Bern
Post Reply