12d Model Forum Index 12d Model
Civil and Surveying Software
 
RegisterRegister   Log inLog in 

Two question about stormwater design

 
Post new topic   Reply to topic    12d Model Forum Index -> 12d Practice Version - General
View previous topic :: View next topic  
Author Message
ALTIN DENIZ



Joined: 11 Oct 2016
Posts: 6

New Zealand

PostPosted: Thu 20 Oct, 2016 12:54 pm    Post subject: Two question about stormwater design Reply with quote

following my previous question about catchments I have two more question I will appreciate any one shed some light on.

1- How one should define the downstream boundary conditions such as downstream flood level for entire reticulation. In other words where in 12d we are able to define all the network's downstream hydraulic specifications such as:
flood level, whether system is discharging to a tale water or existing system with such and such level and pressure.

2- Does 12d generates Hydrograph/unit Hydrographs of the defined inlet catchments by running the model? and if yes how and where is to find it after ruining the system? addition to this, is it possible to attach a hydrogragh to catchment as it's hydraulic input rather than numerical inputs? (A, tc, C ... )

years ago I used to work with drains and I have quite bit of experience with that. all these were the features of drains that gives the designer the chance to control his/her system and I want to figure out similar features in 12d

Thanks
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    12d Model Forum Index -> 12d Practice Version - General All times are GMT + 11 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Contact the Forum Administrator
Powered by phpBB © 2001, 2005 phpBB Group