Page 1 of 1

CAD Export Files

Posted: Wed May 09, 2018 4:34 pm
by Tim Brooks
The below links are to CAD templates with matching mapfiles.

These can be places into your User library.

downloads/PWS/PW_CAD_DESIGN_export.dwt

downloads/PWS/PW_CAD_DESIGN_export.acadmf

https://]forums.12dmodel.com/downloads/PWS/PW_CAD_SURVEY_export.dwt

downloads/PWS/PW_CAD_SURVEY_export.acadmf

The pen weights assigned to CAD colours or CTB requirements are as follows:
acad red - 0.5 pen
acad yellow - 0.35 pen
acad green - 0.5 pen
acad cyan - 0.25 pen
acad blue - 0.7 pen
acad magenta - 0.35 pen
acad white - 0.25 pen
acad dark grey - 0.18 pen
acad light grey - 0.13 pen
acad 032 - 1.0 pen

Posted: Wed Jun 13, 2018 9:47 am
by Tim Brooks
the survey .dwt and .acadmf files have been updated to match the Hydro codes added to the names.4d files.

Click the links above to download the latest files again.

Posted: Tue Jul 17, 2018 9:23 am
by Tim Brooks

PW Text & Title Blocks

Posted: Thu Mar 21, 2019 1:00 pm
by Bill Link
Hi Tim, I am looking into whats involved in adopting PW standards. I see that the template has Arial text style as standard.
I am guessing this is the preferred PW text style, correct?
Also have PW title blocks been decided on?

Posted: Fri Mar 22, 2019 10:29 am
by Tim Brooks
Hi Bill,

yes and at the moment the title block is User defined, however I have a meeting with the IPWEAQ group in a fortnight where I can ask the question if they would like to have a standard title block.

Posted: Fri Mar 22, 2019 10:34 am
by Bill Link
Thanks Tim in considering adopting a IPWEAQ standard it would be good if it included text styles and title blocks.

At this stage I would have to change my title block to Arial text to be consistent.

Re: CAD Export Files

Posted: Thu Jan 21, 2021 9:42 am
by paramasiven gangadoo
hi
These links lead to nowhere

Re: CAD Export Files

Posted: Thu Jan 21, 2021 2:14 pm
by Bill Link
Hi Paramasiven, you can also find most of the templates in the standard user and user library folders of the later releases of 12d I believe.

Re: CAD Export Files

Posted: Thu Jan 21, 2021 3:18 pm
by Tony Nguyen
The links are not working for me either, will ask Blake