Showing the tin beyond the road section in xplot

Any questions regarding the practice version are asked and answered here.
Post Reply
R Lundy
Posts: 8
Joined: Tue Oct 15, 2013 7:41 am

Showing the tin beyond the road section in xplot

Post by R Lundy »

When viewing a section perpendicular to a road alignment I can extend tin in the settings but is there a way to do this or setting for it when I xplot? I have got a road adjacent to a sheer face and need to show the working zone beyond the immeidate road corridor.
Top
Glenn Coppard
Posts: 233
Joined: Thu Jul 24, 2008 7:44 am

Post by Glenn Coppard »

In the XplotPPF Editor, ->Plot sheet layout has left & right extensions.

Set these either as absolute (boxed ticked - measured from 0 on the Xsect) or relative to the end of the section being drawn.
Top
R Lundy
Posts: 8
Joined: Tue Oct 15, 2013 7:41 am

Post by R Lundy »

Cheers Glenn I knew there must be something I just couldn't track it down amongst so many settings!
Thanks again
Top
Post Reply

Return to “General”