Drainage Analysis Query

Any questions regarding the practice version are asked and answered here.
Post Reply
Mikhail Hans Collo
Posts: 78
Joined: Wed Apr 04, 2018 1:38 pm

Drainage Analysis Query

Post by Mikhail Hans Collo »

Hi, Does anyone encountered this problem once you run the analysis before?

Almost all of the field inlets on my drainage design shows the same problem for the drainage pits on the allotment areas.

Image

Thanks.
Owen Thornton
Posts: 5607
Joined: Tue Oct 04, 2005 12:50 pm
Location: Brisbane
Contact:

Post by Owen Thornton »

See:
viewtopic.php?t=7942

Don't worry about the fence/volume errors ... those calculations are not needed by the Rational Method.

But you might have set your maximum ponding depth slightly higher than what is physically possible according to the FS tin.
Mikhail Hans Collo
Posts: 78
Joined: Wed Apr 04, 2018 1:38 pm

Post by Mikhail Hans Collo »

Thanks Owen,

But I cannot open the link that you had provided, here's what comes up on my screen when I try to open the link.

Image
Owen Thornton
Posts: 5607
Joined: Tue Oct 04, 2005 12:50 pm
Location: Brisbane
Contact:

Post by Owen Thornton »

You need to sign up to the forum and login to get access to most of it.
Post Reply