Output Hi Resolution JPEG or similar

Any questions regarding the practice version are asked and answered here.
Post Reply
Tony Iddon
Posts: 7
Joined: Mon Aug 13, 2018 3:45 pm

Output Hi Resolution JPEG or similar

Post by Tony Iddon »

Hi,

What is the quickest way to output a high quality image from a perspective view?

I have some fancy images draped on tins but the detail isn't captured using snipping tool.

Cheers
Ant
Ant
Joel Allsop
Posts: 419
Joined: Mon Nov 24, 2008 3:12 pm

Post by Joel Allsop »

On the perspective view's toolbar, go to the Display button and select Utilities>Dump. BMP/PNG are the cleaner images.

Alternatively for higher res use;
V14: select the Settings>High Resolution Image
V12: select the Settings>Tile
This creates a raster in 12d, which you then need to Dump or Plot.

Note: for the Resolution factor/Plot Factor i wouldn't go much above 20 (unless you have time to wait).
Tony Iddon
Posts: 7
Joined: Mon Aug 13, 2018 3:45 pm

Post by Tony Iddon »

Thanks Joel,

Have you ever had an issue where the XYZ symbol at the bottom left of the view replicates depending on the resolution factor.
For example if I use a factor of 10, I have XYZ symbols all over the screen where it has scaled up the view.
Ant
Joel Allsop
Posts: 419
Joined: Mon Nov 24, 2008 3:12 pm

Post by Joel Allsop »

XYZ Symbol.... Sounds like you still have the 'Orbit' command active?

If so, just hit <Esc> a few times, and then refresh the view.
Tony Iddon
Posts: 7
Joined: Mon Aug 13, 2018 3:45 pm

Post by Tony Iddon »

Bloody legend, was wondering why that only happened sometimes.
Cheers mate!
Ant
Post Reply