Inserting Image a the correct coordinates

Any questions regarding the practice version are asked and answered here.
Post Reply
Kylle Dataman
Posts: 7
Joined: Tue Sep 11, 2018 3:32 pm

Inserting Image a the correct coordinates

Post by Kylle Dataman » Tue Sep 11, 2018 4:09 pm

Hi

I would like to insert image at the correct coordinates, Is there a video showing how to insert the image at the youtube. Please share the link for me to view.

Thanks

Rod Burns
Posts: 87
Joined: Fri Dec 12, 2008 2:27 pm

Post by Rod Burns » Tue Sep 11, 2018 5:57 pm

Hi Kylle,
Below is a link you might fine helpful;
http://www.exds.com.au/online-help/12d-model-cad-help/
Expanding the menus on the left shows the various 12d Cad options.

Insert Cad image.
https://youtu.be/TOrF4I8i0V4

Please note there is a difference between inserting an image (photo) and inserting a raster (aerial imagery).

To insert a Raster follow the "Strings > Rasters > Create" from the main menu and provide the details required.

Regards,
Rod

Peter Murray
Posts: 64
Joined: Fri Oct 21, 2005 8:24 am
Location: Brisbane

Post by Peter Murray » Tue Sep 11, 2018 10:07 pm

Hi Kylie

If you have jpegs with the GPS information in the EXIF data
CAD =>Image =>Insert JPEG(s) may be useful. Allows you to read in
Works really well if the GPS information is reliable.

Kylle Dataman
Posts: 7
Joined: Tue Sep 11, 2018 3:32 pm

Post by Kylle Dataman » Thu Sep 27, 2018 11:35 am

Thank you for your help

Post Reply