PPF Editor - Long Section

Any questions regarding the practice version are asked and answered here.
Post Reply
Mohammad Rahman
Posts: 5
Joined: Tue Sep 25, 2018 9:02 am
Contact:

PPF Editor - Long Section

Post by Mohammad Rahman »

I have plotted a long section, everything comes OK, just there are plenty of + signs and unwanted small lines at each grade change. any idea on how to get rid of them?

Appreciate any help. Tried to put a screenshot but not much luck.
Graeme Winfield
Posts: 1844
Joined: Thu Nov 10, 2005 10:59 am
Contact:

Post by Graeme Winfield »

What version and build of 12d Model are you using (11.0C1q, 12.0C1p)?
Do you have the editor open for the profiled string?
Is the profiled string a Super Alignment?
Mohammad Rahman
Posts: 5
Joined: Tue Sep 25, 2018 9:02 am
Contact:

Post by Mohammad Rahman »

Hi Graeme,
I am using V12. Yes, I have the editor open for the profiled string, its a super alignment.


Best regards,
Mohammad
Graeme Winfield
Posts: 1844
Joined: Thu Nov 10, 2005 10:59 am
Contact:

Post by Graeme Winfield »

Have you tried plotting with the string editor not in use?

Edit: fixed typo
Last edited by Graeme Winfield on Mon Oct 29, 2018 9:39 am, edited 1 time in total.
Mohammad Rahman
Posts: 5
Joined: Tue Sep 25, 2018 9:02 am
Contact:

Post by Mohammad Rahman »

Not really, will appreciate if you could please expand on how to do this?

Many thanks
Graeme Winfield
Posts: 1844
Joined: Thu Nov 10, 2005 10:59 am
Contact:

Post by Graeme Winfield »

Sorry for the typo in the previous post. Just close the string editor before plotting.
Mohammad Rahman
Posts: 5
Joined: Tue Sep 25, 2018 9:02 am
Contact:

Post by Mohammad Rahman »

I have tried it and the problem is still there. They look like associated with the Primary String Drawing and Labelling :x
Owen Thornton
Posts: 5711
Joined: Tue Oct 04, 2005 12:50 pm
Location: Brisbane
Contact:

Post by Owen Thornton »

If this is an old Alignment string and not a Super Alignment, then from the Alignment Edit menu (string editor), turn off Draw ips via Utilities=>Properties.

If it is a Super Alignment, you might need to turn off Use vertical symbol in the SA style definition.
Mohammad Rahman
Posts: 5
Joined: Tue Sep 25, 2018 9:02 am
Contact:

Post by Mohammad Rahman »

It works, magic! Thanks Owen.

PS: You should have seen the dance I have given around the office!
Owen Thornton
Posts: 5711
Joined: Tue Oct 04, 2005 12:50 pm
Location: Brisbane
Contact:

Post by Owen Thornton »

A video, or it never happened. :)
Post Reply