Water Longsection ppf assistance

Any questions regarding the practice version are asked and answered here.
Post Reply
Aofnoa Ieli
Posts: 17
Joined: Fri Aug 07, 2020 5:37 pm

Water Longsection ppf assistance

Post by Aofnoa Ieli »

I'm currently using 12D V14.0C2k and trying to plot water pipeline using from Water/Pipeline/Plots/Long-section. I got message reading "no pipeline strings in network model". Another thing is that we don't have water/Sewer dongle licence. Is that the reasons??

thanks,
Aofnoa
Owen Thornton
Posts: 5711
Joined: Tue Oct 04, 2005 12:50 pm
Location: Brisbane
Contact:

Re: Water Longsection ppf assistance

Post by Owen Thornton »

I'd guess you are using the wrong PPF Editor. What is the string type of your pipeline strings (via F2 String Inquire)?

The Pipeline Plot PPF Editor is rather old and inflexible, and (I think) it only plots Pipeline string types, which are deprecated.

The ordinary Section Long Plot PPF Editor can plot Super Alignment pipeline strings, with a good example being: $LIB\pipeline_longsection_PW_A1.lplotppf

The Water Long Section Plot PPF Editor is for Water (aka Drainage) strings (eg: stormwater, sewer, water supply).
Aofnoa Ieli
Posts: 17
Joined: Fri Aug 07, 2020 5:37 pm

Re: Water Longsection ppf assistance

Post by Aofnoa Ieli »

Hi Owen,

Thanks for getting back. Much appreciated.

My string type is "pipeline" will change my strings to Super Alignment and give a go.

thanks
Owen Thornton
Posts: 5711
Joined: Tue Oct 04, 2005 12:50 pm
Location: Brisbane
Contact:

Re: Water Longsection ppf assistance

Post by Owen Thornton »

The Pipeline Plot PPF Editor should work with strings of type "pipeline".

In the example shown, if the Network model "PIPELINE" does not contain any "pipeline" string types, you will get the error message you reported, as shown:

pipeline_ppf.png
pipeline_ppf.png (49.23 KiB) Viewed 45204 times
Owen Thornton
Posts: 5711
Joined: Tue Oct 04, 2005 12:50 pm
Location: Brisbane
Contact:

Re: Water Longsection ppf assistance

Post by Owen Thornton »

I just tested Super Alignment strings, and they do plot through the Pipeline Plot PPF Editor, too.

(It is definitely not a license issue, as that gives a different error message.)
Aofnoa Ieli
Posts: 17
Joined: Fri Aug 07, 2020 5:37 pm

Re: Water Longsection ppf assistance

Post by Aofnoa Ieli »

Hi Owen,

Thanks for that. I'm working on this project extension and we doing re-alignment of Water/Sewerage reticulation. I need to adopt the same plot ppf file that adopted on the previous stage. As I mentioned earlier we don't have12D Water Module (aka Drainage) licences, I believe limit us to access those plot files. Are there any option there or I'd need to add water module.
Image

Attached, please find ppf image which I tried to adopt. [image]. Sorry I'm not sure how to attach image file.

Assistance is much appreciated.

Thanks,

Fati
Owen Thornton
Posts: 5711
Joined: Tue Oct 04, 2005 12:50 pm
Location: Brisbane
Contact:

Re: Water Longsection ppf assistance

Post by Owen Thornton »

Please email the strings and the PPF you have, to "support@12d.com". I will have a look.

(Please also include a link to this forum topic in the email.)

Cheers,
Owen.
Aofnoa Ieli
Posts: 17
Joined: Fri Aug 07, 2020 5:37 pm

Re: Water Longsection ppf assistance

Post by Aofnoa Ieli »

Hi Owen,

Thanks for that. Email sent. Please let me know if you got it.

regards,

Fati
Graeme Winfield
Posts: 1846
Joined: Thu Nov 10, 2005 10:59 am
Contact:

Re: Water Longsection ppf assistance

Post by Graeme Winfield »

Hi Fati

File has arrived, Owen should be back tomorrow.
Aofnoa Ieli
Posts: 17
Joined: Fri Aug 07, 2020 5:37 pm

Re: Water Longsection ppf assistance

Post by Aofnoa Ieli »

Hi Graeme,
Thanks. Appreciate that.

Fati
Post Reply